A shoe size is a useful starting point, but it is not a complete description of your feet. Two people can usually wear the same numbered size and still need different amounts of width, toe space or volume. The same person can also measure slightly differently from one foot to the other.
That is why a simple at-home measurement can be more useful than relying only on the size printed inside a familiar pair. The goal is not to convert one number into a guaranteed fit. It is to create a repeatable reference you can compare with a model-specific size chart when that chart is available.
This guide explains how to measure foot length and approximate width, how to check the result, and what to look for when trying a high-top silhouette. It is general footwear guidance. Bertonetti’s final model-specific fit guidance has not been established by this article.
What you need
Gather a few basic items:
- two sheets of paper large enough for your feet;
- a pencil or fine-point pen;
- a ruler or tape measure marked in millimeters or centimeters;
- the type of socks you expect to wear with the shoes; and
- a hard, level floor next to a wall.
Measure both feet. If one foot is longer or wider, use the larger measurement as the comparison point unless a qualified fitter gives you different advice.
Measure later in the day
Feet can change slightly during the day. For a more practical comparison, measure when you have already spent some time standing and walking rather than immediately after waking up.
Wear the socks you are most likely to use with the shoes. A thin dress sock and a thicker athletic sock can change how much room you want inside the same silhouette. Keep the sock choice consistent when you repeat the measurement.

Method 1: heel-to-wall length
This method limits how far the heel can move behind you.
- Place a sheet of paper on a hard floor with one short edge touching the wall.
- Stand on the paper with your heel lightly touching the wall.
- Distribute your weight naturally across both feet. Do not curl or stretch your toes.
- Ask another person to mark the paper at the end of your longest toe. If you are measuring alone, keep the pencil vertical and avoid leaning it under the toe.
- Step away and measure from the wall-side edge of the paper to the mark.
- Record the result in millimeters.
- Repeat for the other foot.
Do not assume the big toe is always the longest point. For some people, another toe extends farther forward.
Method 2: outline length and width
An outline can provide a second check and an approximate width reference.
- Stand naturally on a fresh sheet of paper.
- Keep the pencil upright and trace around the foot without angling beneath it.
- Mark the rear-most point of the heel and the forward-most point of the longest toe.
- Measure the straight distance between those two points.
- Find the widest part of the forefoot outline and measure straight across it.
- Repeat for the other foot.
The outline is not a three-dimensional scan. It cannot fully capture arch shape, instep height or overall foot volume. Treat width as another comparison point, not a complete fit diagnosis.
Check the measurement before using it
Repeat the process once. If the two results differ noticeably, check the setup:
- Was the paper flat and touching the wall?
- Was the heel in the same position each time?
- Was the pencil kept vertical?
- Were you standing with weight on the measured foot?
- Did you measure to the actual longest toe?
A repeatable number is more valuable than a rushed one. Record the date, socks and larger-foot measurements so you can reproduce the comparison later.
Do not add your own “extra room” to the size
A size chart should explain how its measurements relate to the inside of a particular shoe or to the foot measurement used for sizing. Do not automatically add a fixed amount to your foot length and then choose a size from an unrelated chart. Different brands and models can use different lasts, internal dimensions and grading rules.
Instead, keep your raw foot measurement and compare it only with the instructions that accompany the specific model. If the chart is unclear about whether it lists foot length or shoe interior length, ask before ordering.
For Bertonetti, use the current Size & Fit page as the authoritative public reference when model-specific guidance is released. This guide does not replace that source.
What a high-top try-on should tell you
When a finished high-top is available to try, evaluate more than length.
If a term such as heel hold, toe room, instep or flex point is unfamiliar, use the footwear glossary before drawing a conclusion from the try-on.
Toe area
Your toes should be able to rest naturally. Check whether the front feels cramped, whether the longest toe meets the end during normal standing, and whether the forefoot feels compressed from the sides.
Heel movement
Walk on a clean indoor surface. Notice whether the heel stays reasonably secure or repeatedly lifts and rubs. A rigidly locked heel is not the only possible fit, but persistent movement can create friction.
Instep and lacing
Lacing should let you secure the shoe without forcing the two sides together or leaving the foot unsupported. If the top of the foot feels compressed even when the laces are adjusted, length alone may not explain the issue.
Ankle opening
A high-top adds material around the ankle. Check the feeling while standing, walking, sitting and bending the ankle. The collar should not create a sharp pressure point during ordinary movement.
Both feet
Try both shoes. Walk long enough to notice differences between the left and right foot rather than judging fit from a single stationary step.
Compare shoes with the socks and clothing you expect to wear
If you plan to wear a high-top with thicker socks, test that combination. If you want to understand how a trouser hem falls over the collar, use trousers with a similar cut during the try-on.
Once size is assessed separately, the high-top lacing guide can help you test lace routing and tension without treating lacing as a sizing correction.
For visual planning, see High-Top Outfit Planning: Three Ways to Balance Color and Hems. That guide discusses proportion and styling, not size or model-specific fit.
To understand the parts of a high-top concept before evaluating a finished sample, read How to Read a High-Top Concept: Shape, Panels and Proportion.
Keep a simple measurement record
Save the following information:
| Field | Example format |
|---|---|
| Date | YYYY-MM-DD |
| Socks | Thin / medium / thick |
| Left length | ___ mm |
| Right length | ___ mm |
| Left forefoot width | ___ mm |
| Right forefoot width | ___ mm |
| Larger comparison foot | Left / right |
| Notes | Instep, orthotic or fitting considerations |
If you use an orthotic or another insert, include it during any later shoe try-on and follow the guidance of the professional who prescribed or fitted it.
Frequently asked questions
Should I measure both feet?
Yes. Small differences are common. Keep both results and use the larger measurement as the starting comparison unless a qualified fitter advises otherwise.
Is my usual sneaker size enough?
It is a reference, not a guarantee. Construction, last shape, width and volume can vary across brands and models.
How much space should be in front of my toes?
There is no single added measurement that works for every shoe. Use the specific model’s fitting instructions and evaluate the finished shoe while standing and walking.
Does this guide tell me my Bertonetti size?
No. It gives you a repeatable foot measurement to compare with future model-specific guidance. It does not confirm fit, availability or a final size chart.
If you are deciding which silhouette to evaluate, the high-tops versus chukka boots guide explains the category-level differences without claiming model-specific fit.
Follow the first collection
You can review The First Collection and join the launch list for collection updates and availability news. Joining the list does not reserve a pair or create an order, and paid ordering is not open through this article.